When winter sets in, most people settle indoors and seal off any cold air that might sneak its way in. Unfortunately, this means natural ventilation and airflow is compromised.
This causes a build-up of moist air, which can quickly develop into mould and mildew. So how do you stop condensation on your windows during winter? Let’s start with how and why it occurs.
Why do my windows ‘sweat’ during winter?
Condensation occurs when warm air hits cold surfaces, like glass windows, or when there’s too much humidity in your home.
Interior window condensation – otherwise known as ‘window sweat’ – occurs frequently during winter. Whether your home is newly built or of a more ‘vintage’ era, window condensation is caused by a lack of natural ventilation in the home, coupled with being warmer inside than outside.
Breathing, cooking, and drying your laundry are some of the biggest culprits for excess moisture. In older homes, it can escape through cracks in the windows or doors, but these days, windows and cavities are all properly sealed, which means little air is escaping.
What damage can window condensation cause?
if you have older windows, condensation can be particularly damaging, as many older window designs are breeding grounds for mould, fungus and other bacteria. It can then seep into internal wall cavities, condensing as it did on your window glass.
The long-term damage can be severe; not just to your home, but to the quality of air you inhale on a daily basis. The build-up of condensation can cause mould to grow throughout your home and furniture, while potentially causing your wall cavities, window panels, and floor boards to decay over time.
How to stop condensation on your windows
1. Use weather stripping
Weather stripping is a protective strip that you can apply to doors and windows to prevent cold air from seeping in through joints and frames.
Weather strips can help to secure the warmth from leaving your home. And, weather stripping can also make your home more energy efficient.
2. Buy a moisture eliminator
Moisture eliminating products help combat build up. They normally in buckets or hangable bags and can be bought from homeware stores and supermarkets. They’re safe to use in bathrooms, kitchens, and closets.
3. Install fans in your bathroom and kitchen
Morning and night, whenever you cook or shower, use your fans. The aim is to have these going throughout the duration of your showering/cooking and even leave them on for a little while afterwards, to help remove the leftover moisture in the air.
4. Circulate the air
It might sound crazy, but you might want to consider turning on those ceiling fans this winter. While we love nothing more than keeping cosy warm, fans circulate the air and help combat condensation. It is recommended to make sure your ceiling fans rotate in a clockwise direction so they push warm air away from the ceiling and back towards the floor.
5. Open your windows
We know it’s tricky with winter weather being so inconsistent and cold, but opening your windows for airflow will dramatically help remove extra moisture.
6. Move your plants
To all you wonderful plant parents out there, you’re in for a surprise. Unfortunately, your plant children release a lot of moisture into the air. And if they’re residing by your windows, condensation will inevitably build up.
Source - re.com.au
by Melanie Murace in Top Tips
Archived Posts
- October 2024 (2)
- September 2024 (1)
- August 2024 (1)
- July 2024 (1)
- June 2024 (2)
- March 2024 (1)
- February 2024 (2)
- November 2023 (1)
- September 2023 (2)
- August 2023 (3)
- July 2023 (4)
- June 2023 (4)
- May 2023 (5)
- March 2023 (2)
- January 2023 (3)
- December 2022 (2)
- November 2022 (7)
- October 2022 (7)
- September 2022 (7)
- August 2022 (9)
- July 2022 (13)
- June 2022 (8)
- May 2022 (9)
- April 2022 (3)
- March 2022 (3)
- February 2022 (1)
- January 2022 (2)
- December 2021 (5)
- November 2021 (6)
- October 2021 (6)
- September 2021 (6)
- August 2021 (5)
- July 2021 (5)
- June 2021 (8)
- May 2021 (4)
- April 2021 (5)
- March 2021 (2)
- February 2021 (4)
- January 2021 (6)
- October 2020 (6)
- September 2020 (6)
- August 2020 (10)
- July 2020 (4)
- June 2020 (4)
- May 2020 (2)
- April 2020 (5)
- March 2020 (4)
- February 2020 (7)
- January 2020 (3)
- December 2019 (2)
- November 2019 (2)
- October 2019 (8)
- September 2019 (6)
- August 2019 (3)
- July 2019 (6)
- June 2019 (4)
- May 2019 (8)
- April 2019 (8)
- March 2019 (7)
- February 2019 (3)
- January 2019 (2)
- December 2018 (2)
- November 2018 (1)
- June 2018 (2)
- May 2018 (4)
- April 2018 (2)
- March 2018 (4)
- October 2017 (1)
- September 2017 (1)
- July 2017 (1)
- May 2017 (1)
- March 2017 (1)
- February 2017 (1)
- December 2016 (1)
- November 2016 (1)
- October 2016 (1)
- September 2016 (1)
- August 2016 (1)
- July 2016 (1)
- June 2016 (1)
- May 2016 (1)
- February 2016 (2)
- January 2016 (1)
- November 2015 (2)
- October 2015 (2)
- September 2015 (2)
- August 2015 (1)
- July 2015 (2)
- May 2015 (1)
- April 2015 (2)
- March 2015 (7)
- February 2015 (7)
- January 2015 (1)
- December 2014 (1)
- November 2014 (2)
- October 2014 (2)
- September 2014 (2)
- August 2014 (3)
- July 2014 (6)
- June 2014 (4)
- February 2014 (4)
- October 2013 (1)
- September 2013 (1)
- August 2013 (1)
- June 2013 (2)
- May 2013 (1)
- October 2012 (1)
- April 2012 (1)
- March 2012 (2)
- December 2011 (2)
- November 2011 (4)
- October 2011 (5)
- September 2011 (4)
- August 2011 (3)
- July 2011 (2)
- May 2011 (1)